English
| Model Number | DS handling capacity (KG/H) 10000mg/L≤ss≤20000mg/L |
External Dimension L(mm)×W(mm)×H(mm) | Net Weight(kg) | Operation Weight(kg) |
| PJXDL131 | 7-14 | 1870× 730× 1065 | 250 | 395 |
| PJXDL132 | 14-28 | 2000× 960× 1070 | 420 | 540 |
| PJXDL251 | 15-30 | 2690× 880× 1500 | 550 | 660 |
| PJXDL252 | 30-60 | 2810× 1120× 1500 | 550 | 660 |
| PJXDL301 | 35-70 | 3310× 1000×1700 | 900 | 1300 |
| PJXDL302 | 70-140 | 3460× 1270×1700 | 1350 | 2000 |
| PJXDL303 | 105-210 | 3630× 1620× 1700 | 1900 | 2700 |
| PJXDL304 | 140-280 | 3960× 2040× 1750 | 2500 | 3600 |
| PJXDL351 | 60-120 | 3610× 1100× 1850 | 1100 | 2000 |
| PJXDL352 | 120-240 | 3820×1410×1850 | 2100 | 3250 |
| PJXDL353 | 180-360 | 4120×1770×1850 | 3100 | 4600 |
| PJXDL354 | 240-480 | 4320× 2290× 1850 | 4100 | 5700 |
| PJXDL401 | 80-160 | 4550×1160×2250 | 2200 | 4200 |
| PJXDL402 | 160-320 | 4870×1680×2250 | 3500 | 6000 |
| PJXDL403 | 240-480 | 4790×2550×2250 | 5500 | 8000 |
| PJXDL404 | 320-640 | 4840×3120×2250 | 7000 | 9500 |
automatic Screw type Press spiral Wastewater Treatment Sludge Dewatering Machine
The main body of press filter sludge dewatering machine is made of multiple fixed annular plates and moveable annular plates with the screw shaft running through it. The front part is concentrating section and the ending part is dewatering section. It can concentrate and dewater sludge in one chamber. Sludge will be transported to the dewatering part after being concentrated in the thickening section.In the advancing process, great pressure has been produced because of the gradually decreasing filter spacing and screw distance with the block of the back platen. Then the volume decreases continuously, and the purpose of fully dewatering will be achieved.
Advantages of our products
•Low energy consumption.
•Minimal water consumption.
•Minimal noise.
•Low polymer consumption.
•No need for proceeding sludge thickening.
•Suitable for any type of sludge even suitable for dewatering oil/grease rich sludge.
•Minimal maintenance and operational cost.
•Capable for working 24/7.
Previous :
Screw Press Sludge Dewatering Plant for Waste Water Treatment PlantNext :
Water Treatment Equipment ManufacturersIf you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Categories
Model Number DS handling capacity (KG/H) 10000mg/L≤ss≤20000mg/L External Dimension L(mm)×W(mm)×H(mm) Net Weight(kg) Operation Wei...
sludge dewatering screw press parameter: The product can be customized according to your requirements. model Screw shaft speci...
Belt Press For Sludge Dewatering Parameter: The product can be customized according to your requirements. Model Belt Width(mm) Ca...
Model HYBFP1000 HYBFP1500 HYBFP2000 Remark Belt Width (mm) 1000 1500 2000 —– Treating Capacity (m³/h) Inlet Consi...
Parameter Filter area (m2) Filter board specification (mm) Thickness of press plate (mm) Number of filter plate (piece) Cubage of...
Product Parameter: Brand Model capacity Dimension(m) Weight(kg) Operating weight (kg) m³/h L W H YH YHDL-131 2 2.4 0.7 1.5 22...
Our company provides high quality and stable products, including reverse osmosis system, sludge dewatering machine, mechanical grille, dosing device, electrical control cabinet, etc., our professionals will provide you with installation, commissioning, operation, and follow-up maintenance services to help you solve problems!
For inquiries about our products or pricelist, please leave to us and we will be in touch within 24 hours.
Yixing Shenghe Environmental Protection Co., Ltd.
IPv6 network supported
+8617396866112